Věžnice Wind Park

VtE VěžniceA couple of modern wind power plants near Věžnice in the territory of the Vysočina region went into operation at the end of 2009.

The facility operated by ČEZ should cover the demand of 3 thousand households.

The general vendor of the design is ŠKODA PRAHA Invest. The technology of the unit installed power of 2 MW was supplied by REpower Systems, a German company.

Clean power from Vysočina

The location is situated between Polná and Přibyslav at an altitude exceeding 500 metres with good wind conditions. Wind velocity reaches on average 6-7 m/s here at an altitude of 100 metres. Work on the design began in 2004 on the land of private owners of the Věžnice municipality and it originally considered eight units. The permit process itself took three years and was unfortunately accompanied by other delays usual for under Czech circumstances. ČEZ Renewable Sources (ČOZ) consequently purchased the whole design from the municipality, including a building permit and successfully completed the whole project.

Technology of the wind power plants in the locality of Věžnice

Manufacturer REpower Systems AG
Type of wind power plant REpower MM92
Nominal power 2 050 kW
Height from the rotor axis 80m
Rotor diameter 92,5 m
Total height 126,3 m
Diameter of the tower base 4,3 m
Total weight 254,8 tun
Pitch power control active rpm control by changing the angle of rotor blade pitch
Rotor operating speed 7 – 16 ot/min
Generator Asynchronous generator 900 - 1800 rpm, U = 690V
Period of construction September – December 2009 (earth work, erection, setting, pre-operation testing)